Home click
BLE 7 click

The BLE 7 click is a Click board™ which provides BT/BLE connectivity for any embedded application. This click is based on the BGX13S22GA-V31, a SiP module from Silicon Labs. The BLE 7 click is an ultra-small, high-performing, Bluetooth low energy module used for easy integration of Bluetooth low energy connectivity (BLE) into various electronic devices. Given its features, this click can be used for health, sports, and wellness devices as well as industrial, home, and building automation; and smart phone, tablet, and PC accessories. For…

Read More

UART Mux click

The UART Mux click is a Click board™ that features the SN74LV4052A, a Dual 4-Channel Multiplexer and Demultiplexer from Texas Instruments. Some of the typical applications for the SN74LV4052A include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems, which makes it ideal for multiplexing the UART pins from the mikroBUS™ to the multiple outputs. This click switches the UART pins (RX and TX) from the mikroBUS™ to one of the four available outputs. For more information about…

Read More

6DOF IMU 11 click

The 6DOF IMU 11 click is a Click board™ based on the KMX63, a 6 Degrees-of-Freedom inertial sensor system on a single silicon chip, which is designed to strike a balance between current consumption and noise performance with excellent bias stability over temperature. This click can be used for applications which require movement and orientation features, such as screen orientation, navigation, game playing, and machine/vibration analysis.   For more information about the 6DOF IMU 11 click, please visit the product page. Sincerely yours, Mikroe

Read More

Fan 6 click

The Fan 6 click is a Click board™ which features the EMC2103, an SMBus compliant fan controller with up to up to 3 external and 1 internal temperature channels. The fan driver can be operated using two methods each with two modes. The methods include an RPM based Fan Speed Control Algorithm and a direct PWM drive setting. The Fan 6 click allows the user to program temperatures generated from external sources to control the fan speed. For more information about the Fan 6 click,…

Read More

Balancer 5 click

Balancer 5 Click is an intelligent 2-cell Li-Ion battery charger, system power manager, and a battery fueled gauge Click board™. The Balancer 5 click is based on BQ25887 controller which has some extra features enabling charging without too much hassle. This click is a perfect choice for development 2S lithium-ion (Li+) cell battery charging with cell balancing. It is optimized for USB input and it can charge 2 batteries with a voltage up to 3.3A. For more information about the Balancer 5 click,…

Read More

Buck 14 click

The Buck 14 click is a Click board™ based around the BMR4613001/001, a PoL regulator from Flex. It’s a high-efficiency step-down converter that can easily deliver up to 12A of current with maximum of 60W of power and high efficiency, typ. 96 % at 12Vin, 5Vout and 80% load. It is designed to operate in different thermal environments and sufficient cooling must be provided to ensure reliable operation. The Buck 14 click is a perfect choice for step-down applications for embedded electronic devices, servers, routers,…

Read More

Single Cell click

The Single Cell click is a Click board™ which features the MCP16251 synchronous boost regulator and the MCP1811A low-dropout (LDO) linear regulator, from Microchip. Given the potential applications of these features, the Single Cell click can be used for one, two and three-cell Alkaline and NiMH/NiCd portable products, solar cell applications, personal care and medical products, smartphones, MP3 players, wireless sensors and many more. For more information about the Single Cell click, please visit the product page. Sincerely yours, Mikroe

Read More

6DOF IMU 9 click

The 6DOF IMU 9 Click is a Click board™ which features the IAM-20680, a 6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer, from TDK InvenSense. This Click board™ can be used for automotive applications and navigation systems aids for dead reckoning, lift gate motion detection, accurate location for vehicle to vehicle and infrastructure, 360º view camera stabilization, car alarm, telematics and insurance vehicle tracking. For more information about the 6DOF IMU 9 click, please visit the product page. Sincerely yours, Mikroe

Read More

LIN click

The LIN click is a Click board™ that features the TLE7259-3GE, a LIN transceiver from Infineon Technologies, with integrated wake-up and protection features. The LIN click can be used for automotive applications: body controllers and gateway modules, switch panels, wiper or window lift modules, door and seat control modules and engine management units. For more information about the LIN click, please visit the product page. Sincerely yours, Mikroe

Read More

GMR Angle click

The GMR Angle Click is a Click board™ that features the TLI5012B E1000, which is a 360° angle sensor that detects the orientation of a magnetic field, made by Infineon. The GMR Angle click is ideal for angular position sensing in industrial and consumer applications such as electrical commutated motor (e.g. BLDC), fans or pumps. For more information about the GMR Angle click, please visit the product page. Sincerely yours, Mikroe

Read More

  • 1
  • 2