Home click board
Balancer 5 click

Balancer 5 Click is an intelligent 2-cell Li-Ion battery charger, system power manager, and a battery fueled gauge Click board™. The Balancer 5 click is based on BQ25887 controller which has some extra features enabling charging without too much hassle. This click is a perfect choice for development 2S lithium-ion (Li+) cell battery charging with cell balancing. It is optimized for USB input and it can charge 2 batteries with a voltage up to 3.3A. For more information about the Balancer 5 click,…

Read More

Buck 14 click

The Buck 14 click is a Click board™ based around the BMR4613001/001, a PoL regulator from Flex. It’s a high-efficiency step-down converter that can easily deliver up to 12A of current with maximum of 60W of power and high efficiency, typ. 96 % at 12Vin, 5Vout and 80% load. It is designed to operate in different thermal environments and sufficient cooling must be provided to ensure reliable operation. The Buck 14 click is a perfect choice for step-down applications for embedded electronic devices, servers, routers,…

Read More

6DOF IMU 9 click

The 6DOF IMU 9 Click is a Click board™ which features the IAM-20680, a 6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer, from TDK InvenSense. This Click board™ can be used for automotive applications and navigation systems aids for dead reckoning, lift gate motion detection, accurate location for vehicle to vehicle and infrastructure, 360º view camera stabilization, car alarm, telematics and insurance vehicle tracking. For more information about the 6DOF IMU 9 click, please visit the product page. Sincerely yours, Mikroe

Read More

LIN click

The LIN click is a Click board™ that features the TLE7259-3GE, a LIN transceiver from Infineon Technologies, with integrated wake-up and protection features. The LIN click can be used for automotive applications: body controllers and gateway modules, switch panels, wiper or window lift modules, door and seat control modules and engine management units. For more information about the LIN click, please visit the product page. Sincerely yours, Mikroe

Read More

GMR Angle click

The GMR Angle Click is a Click board™ that features the TLI5012B E1000, which is a 360° angle sensor that detects the orientation of a magnetic field, made by Infineon. The GMR Angle click is ideal for angular position sensing in industrial and consumer applications such as electrical commutated motor (e.g. BLDC), fans or pumps. For more information about the GMR Angle click, please visit the product page. Sincerely yours, Mikroe

Read More

FRAM 3 click

The FRAM 3 Click is a Click board™ that carries a ferroelectric RAM module. Ferroelectric RAM, also known as FRAM, is a non-volatile memory type, with characteristics that are comparable to much faster DRAM memory modules. It offers much faster alternative to common serial FLASH and EEPROM modules, which use the conventional technologies. FRAM 3 click uses the MB94R330, a serial FRAM module from Fujitsu Semiconductor LTD. For more information about the FRAM 3 click, please visit the product page. Sincerely yours, Mikroe

Read More

Secure SOIC click

Secure SOIC Click is a universal, socket based Click board™ specifically designed for the Microchip CryptoAuthentication™ devices in an 8-pin SOIC package. This Click board™ allows use in various security applications, including Network/IoT Node Endpoint Security, Secure Boot, Small Message Encryption, Key Generation for Software Download, Ecosystem control, Anti Counterfeiting and similar. For more information about the Secure SOIC click, please visit the product page. Sincerely yours, Mikroe

Read More

H-Bridge 4 click

H-Bridge 4 click is a Click board™ that contains the AP1010AEN, which is a two channel H-Bridge motor driver compatible with a motor operating voltage up to 18V and can drive two DC motors or one stepper motor. The protection circuit has under voltage lockout circuit, thermal shutdown circuit, and overcurrent protection circuit, and overcurrent protection circuit can be disabled with the DIS OCP terminal. For more information about the H-Bridge 4 click, please visit the product page. Sincerely yours, Mikroe

Read More

AM/FM click

AM/FM click is a RADIO RECEIVER Click board™ that can be used to listen to music from the AM and FM radio bands. It is based on the Si4731 IC – digital CMOS AM/FM radio receiver IC integrates the complete broadcast tuner and receiver function from antenna input to digital audio output, from Silicon Labs. The AM/FM click is an ideal solution to be used for cellular phones, MP3 players, portable media players, wireless speakers, personal computers and any other applications, where the…

Read More

Check out the new Heart rate 8 click on MikroE website

We’ve got a new optical biosensor in our click board™ line!  Slightly different from Heart Rate 6, our new optical biosensor Click board™ Heart Rate 8 features the BH1792GLC sensor made by ROHM. We’ve designed this Click board™ for heart-rate monitoring (HRM). In order to do the monitoring accurately, it employs a specialized sensor that incorporates two LED drivers, and green light photo-sensing elements. It’s common knowledge that the green light is the best for measuring the dilatation of the blood vessels. So, we’ve equipped…

Read More

  • 1
  • 2